8
Mounting the RINGMAX on the wall
Fasten the the enclosed mounting screw to the wall at a suitable place.
Mount the RINGMAX on the screw via the “keyhole” on the backside of the
unit. Please note that the length of the line cord is 3 meters (10 feet); do
not mount the unit too far from the telephone socket. To avoid damage to
the RINGMAX, always make sure that it is well attached.
See Fig. 2.
Fig 2
Note: The RINGMAX should be connected to a
single phone line only. Do not attempt to connect the
RINGMAX to a phone bank or multi-phone line system
or it will not work properly.
To Next Page
Loading...