Williams OVERTURE III - Operations - Metronome and Transpose; Metronome Settings; Transpose Functionality

OWNER'S MANUAL
14
Metronome Function
PresstheMetronomebuttontoturnonthe
metronome.TheLEDwilllight.Youwillhearthe
clickinheadphonesorspeakers.
PresstheMetronomebuttonagaintoexit
metronomefunction.TheLEDwillturno.
To Change Metronome Time Signature:
1. Pressthe[FUNCTION]button.
2. TurntheValueDialtoselectMetronome
signatureeditmenu.Thedisplaywillshow
“TimeSig”.
3. PresstheFunctionbuttonagaintoenterthe
relativeparametereditmenu,andtheFUNC
indicatorwillblinktoindicatetheparameter
iseditable.
4. TurntheValueDialtoselectatimesignature.
The time signature can also be changed with the
following shortcut:
1. Pressandholdthe[METRONOME]buttonfor2
seconds.TheLCDdisplaywillshowthecurrent
metronomesignaturesettingandthengobackto
currentVoicename.
2. TurntheValueKnobtodeterminetheMetronome
timesignaturewhilethedisplayshowsthe
currentsetting.
Thedefaultis4/4andthefollowingoptionsare
availabletotogglethrough:1/4,2/4,3/4,4/4,5/4,
6/4,3/8,6/8,7/8,9/8,and12/8.
To Set the Volume Level of the Metronome:
1. Pressthe[FUNCTION]button.
2. TurntheValueDialtoselecttheMetronomeVolume
editmenu.Thedisplaywillshow“MetroVol”.
3. PresstheFunctionbuttonagaintoenterthe
relativeparametereditmenu,andtheFUNC
indicatorwillblinktoindicatetheparameteris
editable.
4. TurntheValueDialtoselecttheMetronome
Volumerange(0-127).
To Set the Tempo:
1. Pressthe[FUNCTION]button.
2. TurntheValueDialtoselectTempoeditmenu.
Thedisplaywillshow“Tempo”.
3. PresstheFunctionbuttonagaintoenterthe
parametereditmenu.TheFUNCindicatorwill
blinktoindicatethevalueiseditable.
4. TurntheValueDialtoselectTempo.(20-280)
Transpose Function
Thisfunctionwilltransposethepianokeyboardby
upto+12or-12semitones.
To transpose the keyboard:
1. Pressandholdthe[TRANSPOSE]button.The
displaywillshowthecurrentTransposesettingin
thelowerright-handcornerofthedisplay.
2. WhiletheTransposeindicatorison,youcan
turntheValueDialtoselecttheTranspose
range(+12or-12semitones),orplayanykey
withintheoctavesaboveorbelowmiddleCto
automaticallyjumptothatinterval.
20453755 Williams Overture III Owner's Manual_V3.indd 1420453755 Williams Overture III Owner's Manual_V3.indd 14 8/2/21 1:57 PM8/2/21 1:57 PM