Wilo TOP-S - 2.2 Personnel qualifications for operation; 2.3 Consequences of ignoring safety instructions; 2.5 Operator safety instructions

English
26 WILO SE 11/2013
Information that appears directly on the product, such as:
• Direction of rotation arrow, flow direction symbol
• Identification for connections
• Rating plate
• Warning sticker
Must be strictly complied with and kept in legible condition.
2.2 Personnel qualifications
The installation, operating and maintenance personnel must have the appropri-
ate qualifications for this work. Area of responsibility, terms of reference and
monitoring of the personnel are to be ensured by the operator. If the personnel
are not in possession of the necessary knowledge, they are to be trained and
instructed. This can be accomplished if necessary by the manufacturer of the
product at the request of the operator.
2.3 Danger in the event of non-observance of the safety instructions
Non-observance of the safety instructions can result in risk of injury to persons
and damage to the environment and the product/unit. Non-observance of the
safety instructions results in the loss of any claims to damages.
In detail, non-observance can, for example, result in the following risks:
• Danger to persons from electrical, mechanical and bacteriological influences
• Damage to the environment due to leakage of hazardous materials
• Property damage
• Failure of important product/unit functions
• Failure of required maintenance and repair procedures
2.4 Safety consciousness on the job
The safety instructions included in these installation and operating instructions,
the existing national regulations for accident prevention together with any
internal working, operating and safety regulations of the operator are to be
complied with.
2.5 Safety instructions for the operator
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appli-
ance.
• If hot or cold components on the product/the unit lead to hazards, measures
must be taken on site to guard them against touching.
• Guards protecting against touching moving components (such as the coupling)
must not be removed whilst the product is in operation.
• Highly flammable materials are always to be kept at a safe distance from the
product.