8
Unpacking
Open shipping container and check for shipping
damage. Smaller parts are found in a separate
box at the foot of the band saw. Report any
damage immediately to your distributor and
shipping agent. Do not discard any shipping
material until the Band Saw is set up and
running properly.
Compare the contents of your container with the
following parts list to make sure all parts are
intact. Missing parts, if any, should be reported
to your distributor. Read the instruction manual
thoroughly for assembly, maintenance and
safety instructions.
Contents of the Shipping Container
1 Band Saw
1 Fence
1 Knob
1 Shear
1 Eye Bolt
1 Set of Hex Wrenches (3, 6, 8 and 10 mm)
1 Set of Keys (Model 8020FW only)
1 Owner's Manual
1 Warranty Card
Read and understand the entire contents of this manual before attempting set-up
or operation! Failure to comply may cause serious injury.
To Next Page
Loading...
