To Next PageTo Next Page
Need help?Do you have a question about the Wilton 8201 and is the answer not in the manual?
Assemble the band saw frame to the base unit.
Securely bolt the saw to the shop floor for stability.
Connect the band saw to the appropriate power source.
Understand and use the machine's start/stop and speed controls.
Information on blade selection and speed for various materials.
Set the upper blade support and guide mechanism height.
Set the correct blade tension using the spring loaded mechanism.
Adjust the table angle relative to the saw blade.
Ensure the work table is level relative to the saw blade.
Ensure the miter slot is parallel to the blade.
Set blade speed based on material being cut.
Shift the clutch mechanism for speed selection.
Move drive belts to desired pulley positions.
Adjust pulley positions on shafts for belt drive.
Procedure for safely replacing the saw blade.
General
