Wilton 99174 - Important Information; Introduction; Limited Warranty; Table of Contents

IMPORTANT INFORMATION
2
TABLE OF CONTENTS
INTRODUCTION
Your new Wilton
®
14-inch Abrasive Chop Saw is a
rugged, dependable tool that will cut metal and other
materials with extreme accuracy and repeatability.
Easy to operate, it’s the ideal saw for the serious Do-
It-Yourselfer.
Take time to read these Operation and Safety
Instructions. A thorough understanding of your saw
will enable you to use it to its full potential.
SPECIFICATIONS
MODEL NUMBER................................................99174
Motor
Power Source............................120V AC, 60 Hz, 15 A
Horsepower...........................................................2-1/2
Speed...........................................2800 RPM (no load)
Cutting disc..............................................14" (35.6 cm)
Arbor.............................................................1" (2.5 cm)
Swiveling vise clamp assembly .............0 – 45˚ right;
0 – 30˚ left
Maximum cutting diameter ................4 1/2" (11.4 cm)
Net weight........................................46 lbs 3 oz (21 kg)
LIMITED WARRANTY
Wilton Power Tools are warranted against defects in workmanship and material for a period of two (2) years from the date of purchase.
This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear,
improper repair or alterations, lack of maintenance, or use for purposes other than those for which the tool was designed. This
warranty does not cover products used for commercial, industrial or educational purposes. Any return must be preauthorized, so
please contact our Consumer Relations Department with warranty claims at 1-800-274-6848 for further instructions. If it is determined
that the product is within this warranty, replacement parts or complete product replacement will be made at our discretion.
WMH TOOL GROUP
TM
LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT.
EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME
STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY
NOT APPLY TO YOU.
WMH TOOL GROUP
TM
SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR
INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
IMPORTANT INFORMATION....................................2
Introduction..........................................................2
Specifications.......................................................2
LIMITED WARRANTY ...............................................2
SAFETY .....................................................................3
General Safety Warnings.....................................3
Special Safety Rules for Chop Saws...................4
Electrical Requirements.......................................6
BEFORE YOU START...............................................8
Know Your Chop Saw..........................................8
Unpacking the Chop Saw....................................9
ASSEMBLY..............................................................10
OPERATION ............................................................11
On/Off Switch.....................................................11
Swiveling Vise Clamp Assembly........................11
Angle Plate.........................................................11
Remove/Install Cutting Disc ..............................12
Adjust Cutting Depth..........................................12
Cut a Workpiece................................................13
MAINTENANCE.......................................................14
SERVICE..................................................................15