Capture Num
The camera can set to capture 1 photo, 2 photos or 3 photos continuously.
Video Length
Set the length of capturing video (5S / 10S / 20S / 30S / 60S / 3mins / 5mins / 10mins). The system
default is 5 seconds.
Sensitivity
Set the sensitivity of PIR detector. Select “HIGH” for indoor because of low interference. For outdoor in
normal condition, choose “MIDDLE”.If the camera is affected infinitely by environment, you should select
“LOW”. “HIGH” applies to normal environment and “LOW” applies to cold environment.
Timer Setting
The camera will be set to work within a certain time. Press the menu button to find out this setting item
and you will see the start and stop time can be set. Select the “ON” mode. The camera will take photos or
record videos only in the set time interval and be on standby at other times after it is be set.
Security Code
Set the password of power-on. In the mode of TEST, choose the combination of a 4-digit number from 0
to 9 and A to Z. Please do remember the password!
Time Lapse
With this function, the camera will take photos automatically in the selected time interval and all images
will create a consistent video. This is useful for observing cold blooded animals or plants opening up, e.g.
the process of blooming. Select “TEST”, press menu button to find out setting item to set.
01 02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36 37 38 39 40 41 42
43 44 45 46 47 48 49 50 51 52 53 54 55 56
57 58 59 60 61 62 63 64 65 66 67 68 69 70
EN
support@wimius.com
To Next Page
Loading...