Format Memory Card
Power on/off
Set mode switch to "TEST"/ "ON", the camera turns on. (The LCD will be closed after 5s in the "ON" mode.)
Switch to the "OFF", and then it turns off.
● ON status: Switch from TEST to ON, the red light will be flash. After the countdown, red light and display
screen will be off and the camera gets into standby mode.
● Test status: Switch from ON/OFF to TEST, the camera screen is on and can be set.
● OFF status: Switch to OFF to turn the camera off.
System Setting
● Press Menu button to enter the menu item. It will return to the last menu or exit the menu when press the
button again.
● Press Up or Down button to navigate submenu. Read more details on each setting by pressing the OK
button.
● Press Up or Down button for browsing options. Press OK to confirm your setting.
Mode
● There are three modes: Photo, Video and PhotoVideo. In the mode of PhotoVideo, the camera will take
a photo firstly and then record video.
● Switch mode between Video and Photo quickly by pressing Up or Down button.
All data on the memory card will be deleted permanently while you format it.You should format the memory
card when you use a new one or the card that other electrical devices have been using. Choose YES and
confirm by pressing OK button. It shows “Waiting” on the screen when the memory card is being format-
ted.“Formatting success” will display after it is done.
Setting & Operation
01 02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27 28
29 30 31 32 33 34 35 36 37 38 39 40 41 42
43 44 45 46 47 48 49 50 51 52 53 54 55 56
57 58 59 60 61 62 63 64 65 66 67 68 69 70
EN
support@wimius.com
To Next Page
Loading...