support01@wimius.com
EN 2
1. Do not place the projector in a room that is too hot or too cold, because high temperature or low
temperature will affect the performance of the projector. shorten the service life of the equipment. The
working environment is preferably 5°C~35°C.
2. Equipped with a ventilation device to ensure the stable operation of the projector. Do not cover the vents
with cloths, blankets, or other items. Do not insert objects of any kind into the slots of the projector, as this
may cause a short circuit or electric shock and damage the device.
3. The projector should be strictly protected from strong impact, extrusion and vibration. don't try to keep
moving Strong shocks, squeezes and vibrations. Do not try to move and internal circuit failure.
4. As the core component of the projector, the lens is directly related to the clarity and effect of the picture.
Excessive Wiping dust off the lens can affect image quality. Dirty lenses should be wiped with a soft
cotton cloth on the surface of the glass lens. Do not use hard cloths or abrasives.
5. Please control the ambient lighting in the room to enhance the visibility of the projected image. Dimming
the lights or using curtains can help reduce glare and improve image quality.
6. If you have any questions, please do not worry, please contact
support01@wimius.com
via email.
TIPS
To Next Page
Loading...
