BEETLE /M-III User Manual 5
This symbol is used for warnings.
The type and scope of application programs depend on the customer’s
own selection; therefore, software will not be discussed further in this
manual.
For the peripheral devices of the BEETLE /M-III you can find detailed infor-
mation in the respective manuals.
See
http://www.wincor-nixdorf.com/internet/site_EN//EN/Support/
Downloads/POSLotterySystems/Manuals/manuals_node.html
Care Of the BEETLE /M-III
Clean your BEETLE /M-III at regular intervals with a dry, lint-free cloth. If
that does not suffice please use a suitable plastic-surface cleaner which
can be ordered from Wincor Nixdorf International GmbH. Make sure that
the power plug is disconnected and that no liquid finds its way into the de-
vice.
Recycling the BEETLE /M-III
Environmental protection does not begin when the time has come to dis-
pose of the BEETLE; it begins with the manufacturer. This product was de-
signed according to our internal norm “Environmental conscious product
design and development”.
The modular BEETLE /M-III system is manufactured without the use of CFC
and CHC and is produced mainly from reusable components and
materials.
Please do not stick labels onto plastic case parts. This would help us to re-
use components and material. At the moment, there are still some parts
that are not reusable. Wincor Nixdorf International GmbH guarantees the
environmentally safe disposal of these parts in a Recycling Center, which is
certified pursuant to ISO 9001 and ISO 14001.
So, when your BEETLE /M-III it has served its time take advantage of the
environmentally smart, up-to-date recycling methods!
To Next Page
Loading...
Need help?
General
