Need help?Do you have a question about the Wincor Nixdorf TH200E and is the answer not in the manual?
General| Printing Method | Direct Thermal |
|---|---|
| Print Speed | 200 mm/sec |
| Resolution | 203 dpi |
| Paper Roll Diameter | up to 83 mm |
| Cutter | Yes |
| Power Supply | 24 VDC |
| Type | Thermal Printer |
| Interface | USB, Ethernet |
Wincor Nixdorf's limited warranty engagement for 12 months covering damages during normal use.
Important safety instructions for using the printer, including warnings about hot parts and cutters.
Instructions for unpacking the printer and verifying contents against the packing list.
Guidance on selecting a suitable and safe location for printer setup.
How to adjust the paper roll guide to accommodate different paper widths.
Explanation of the status and error LED indicators and their meanings.
Perform a self-test to check printer configuration and basic functionality.
Change various parameter settings for the printer.
Test the printer's autocutter functionality with partial and full cuts.
Test printer sensors by observing the ERR LED status.
View statistics on paper cuts and linefeeds performed by the printer.
Instructions for cleaning the print head using alcohol solvent and non-abrasive cloth.
How to clean sensors to ensure correct paper status detection.
Procedure for cleaning the platen roller to resolve paper misfeeds.
Detailed technical specifications and dimensions of the printer.
Details of the drawer kick-out connector pins and signals.
Information on the power supply connector pinout and connections.
Pinout and signal definitions for the serial port (RS232) connector.
Pinout and signal definitions for the Ethernet port connector.
To Next Page
