04
Product Overview
Assembly
If you can't install bike accessories well, we recommend taking your new bike to a bikeshop
for assembly and inspection. If you are willing to assemble the bike yourself, be sure to follow
all instructions, properly adjust gears and brakes, and set tire pressure.
Unfold
1. Be careful not to position your fingers between the latch and the frame. You may get
injured if you do it.
2. Unfold the rear wheel/ section and hold your e-bike up right with the kickstand.Push the
latch closed so that it's parallel with the bike's frame then turn the latch lock down towards
the latch to lock it in place.
3. Open the kick stand and place the entire bike.
Grip
Brake handle
Vertical folding clasp
Headlight
Front fender
Front Suspension
Front disc brake
Front disc
Tire
Middle Folding
Clasp
Crankset
Pedal
Wheel Chain
Rear disc
Motor
Rear disc brake
Back fender
Back light
Rear rack
Seat
Key hole
Seat post binder
Battery
LED Display
Gear Shift
Kickstand
To Next Page
Loading...
