What to do if 'Reset' is not displayed in the menu line of my Windhager BioWIN XL?
If the 'Reset' option isn't showing in the menu, the Windhager boiler will automatically restart once the underlying issue causing the information, fault, or alarm message has been resolved.
Covers general safety rules, liability exclusion, and notes for system operators.
Details manufacturer, installer, and operator obligations.
Requirements for annual checks of safety devices and system condition.
Criteria for approved wood pellets and consequences of using low-quality fuel.
Preconditions for commissioning and the importance of routine maintenance by specialists.
Procedure and safety notes for filling the pellet storage area.
Hazards related to power failure, burner pot, and entering pellet storage areas.
Explains safety symbols and provides essential safety instructions for operation.
Overview of the BioWIN XL boiler's automated functions and components.
Identification and description of the boiler's physical components and operating controls.
Essential checks including system pressure, ventilation, flue, and barriers before initial startup.
Details on the InfoWINPLUS display, buttons, and backlight colors for operation.
Explanation of different operational states like OFF, ON, self-test, and phases like Standby, Purging.
How to perform manual operation and adjust settings like time and feed modes.
How to navigate through the different menu levels (Operator, Service, Information).
Accessing and navigating sub-menus within the operator level for settings.
Operating the boiler with external heating system controls.
Overview of recommended intervals for cleaning and maintenance tasks.
Lists cleaning tools and instructions for caring for cladding and keyboard foil.
Step-by-step guide for safely removing and emptying the ash container.
Proper disposal of ashes and information on creosote formation and removal.
Steps for cleaning the combustion chamber, thermocontrol sensor, and burner pot.
Instructions for cleaning the induced draft fan and the ash chamber.
Maintenance for integral fuel hoppers, coarse filter, and fill level switches.
Safety precautions and maintenance for the pellet storage room or hopper.
Diagnosing and resolving issues where the InfoWINPLUS display is off or not lit.
Understanding and resolving common system messages and codes.
Detailed steps for resolving specific fault codes like FE 239, FE 281, etc.
Interpreting and resolving critical alarm codes and system errors.
Lists spare parts for the 3-way changeover unit and suction turbine.
Spare parts for the thermal discharge safeguard and main boiler assembly.
Detailed lists of spare parts for the BioWIN XL burner and cladding.
To Next Page
General
