Windsor Chariot 2 CBPS20 - Page 18

18
Operation
1. FUNCTION MODE SWITCH
The first two positions are for transport only. See drive controls section.
B1 - Light burnishing
This mode is used for light burnishing. In this mode the machine will propel at fast speed. The ‘floating’
burnisher deck is in the down position. When equipped with optional active dust collection, vacuum motor will
be on.
B2 - Deep burnishing
This mode is used for deep burnishing. In this mode the machine will propel at slow speed. The ‘floating’
burnisher deck is in the down position. When equipped with optional active dust collection, vacuum motor will
be on.
1
86356230 Chariot iGloss