16
Operations
Operating Machine With Accessory
Tools
This extractor is easily adapted for use with Windsor
accessory tools: Contact Customer Service for
details.
1. Disconnect vacuum hose at dome, insert hose
cuff into the dome, ensuring that there is a tight
fit. Dome must be clamped to recovery tank.
2. Attach the solution hose from accessory tool to
the brass solution fitting on the back of machine.
3. Turn on the switch in the accessory position. The
application of cleaning solution is now controlled
by the lever on the accessory tool.
NOTE: The solution pump is not intended to run
dry. When using the extractor for vacuum pick-up
only. Do not press the solution spray button.
This appliance is not suitable for picking up
hazardous dust.
Cet appareil n'est pas conçu pour aspirer des
poussières dangereuses.
86401460 Operator’s Manual - Mini Carpet Extractor
To Next Page
Loading...
Need help?
General
