Windsor VS14 - Removing the Switch Housing Cover; Removing the Dust Bag Housing

12
Maintenance
Maintenance and repairs must be done by
qualified personnel.
To reduce risk of electric shock unplug before
cleaning or servicing.
Removing the Switch Housing Cover
Remove the three screws then lift cover off. Circuit
board (33) can be removed by loosening screw (32).
Removing The Dust Bag Housing
Remove the back cover, then remove the 4 screws
(2). Carefully lift the dust bag housing off the power
head.
NOTE: The power cord remains attached between
the dust bag housing and the power head.
86359530 VERSAMATIC 14 & 18
2
2
2
1
32
33
3 Wire