Windsor VS14 - Operations; Components; Assembling the Vacuum Cleaner; Attaching Suction Hose

8
Operations
Components
1. Vacuum motor housing
2. Dust bag housing
3. Suction hose
4. On-off switch
5. Cables cleats
6. Carrying recess
7. Back cover
8. Power head
Assembling The Vacuum Cleaner
Hold the vacuum motor housing in the vertical
position and insert into the power head. Locate the
line (13) on the motor housing accurately opposite
the rib on the swivel neck (14). The locking catch (15)
must be turned to the left during the locating. Secure
the vacuum section in place by turning the locking
catch to the vertical position.
Attaching Suction Hose
Push the black end of the hose into the connecting
tube (12) so that it clicks into place.
To disconnect the hose, press the sides of the
retaining ring (11) and pull the hose out of tube.
86359530 VERSAMATIC 14 & 18
13
14
15
5
2
1
7
3
8
9
6
4
12
11