Windsor wave - User Manual

Pro STAR Industries
1590-A N. Harvey Mitchell PKWY
Bryan, TX 44503
979-779-9399 1-800-262-7104
WAVE Instructions page 1
The following symbols are used throughout this guide as
indicated in their descriptions:
HAZARD INTENSITY LEVEL
There are three levels of hazard intensity identified by
signal words -WARNING and CAUTION and FOR
SAFETY. The level of hazard intensity is determined by
the following definitions:
WARNING
WARNING - Hazards or unsafe practices, which could
result in severe personal injury or death.
CAUTION
CAUTION - Hazards or unsafe practices, which could
result in minor personal injury or product or property
damage.
FOR SAFETY To Identify actions, which must be
followed for safe operation of equipment.
The following information signals indicate potentially
dangerous conditions to the operator or equipment.
Read this guide carefully. Know when these conditions
can exist. Locate all safety devices on the machine.
Then, take necessary steps to train machine operators.
Report machine damage or faulty operation
immediately. Do not use the machine if it is not in proper
operating condition.
For SAFETY:
DO NOT OPERATE MACHINE:
•• Unless Trained and Authorized
•• Unless Operation Guide is Read and
understood.
•• In Flammable or Explosive areas.
WHEN USING MACHINE:
•• Go slow on grades.
•• Do not carry riders on machine.
BEFORE LEAVING OR SERVICING MA CHINE:
•• Stop on level surfaces.
•• Turn oft machine.
WHEN SERVICING MACHINE:
••Avoid moving parts. Do not wear loose jackets,
shirts, or sleeves when working on machine.
•• Use only Windsor approved replacement parts.
SAFETY
WARNING
To reduce the risk of fire, electric shock, or injury:
1. Use only as described in this manual. Use only
manufacturer’s recommended attachments.
2. Use indoors only. Do not use outdoors and do not
expose to rain.
3. Machine can cause a fire when operating near
flammable vapors or materials. Do not operate this
machine near flammable fluids, dust or vapors.
4. Do not pick up flammable fluids, dust or vapors.
5. Do not vacuum anything that is burning or smoking,
such as cigarettes, matches, or hot ashes.
6. Do not handle the plug or machine with wet hands.
7. Do not leave the machine unattended. Unplug machine
from outlet when not in use and before servicing.
8. Do not unplug machine by pulling on cord. To unplug,
grasp the plug, not' the cord.
9. Do not use with damaged cord or plug. Follow all
instructions in this manual concerning grounding the
machine.
10. If the machine is not working properly, has been
dropped, damaged, left outdoors, or dropped into water,
return it to an Authorized service center.
11. Do not pull or carry by cord, use cord as a handle, close
a door on cord, or pull cord around sharp edges or
corners.
12. Do not pull/run machine over cord. Keep cord away from
heated surfaces.
13. Do not allow to be used as a toy. Close attention is
necessary when used near children.
14. Do not operate machine with any opening blocked. Keep
openings free of debris that may reduce airflow.
15. Keep hair, loose clothing, fingers, and all parts of the
body away from openings and moving parts.
16. Do not use machine as a step.
17. Connect to a properly grounded outlet. See Grounding
Instructions.
18. Do not pickup health endangering dust or contaminants.

Summary

Hazard Intensity Levels

Warning

Defines hazards or unsafe practices that could result in severe personal injury or death.

Caution

Defines hazards or unsafe practices that could result in minor personal injury or product/property damage.

For Safety

Identifies actions that must be followed for safe operation of equipment.

Safety Instructions

Reference Sections

General Information

Contains safety precautions and an overview of safety measures for operation and maintenance.

Grounding Information

Details grounding instructions and the importance of proper electrical grounding for safety.

Operation

Provides information on machine operation, including instruments, controls, transport, and storage.

Set Up

Guides the user through the initial setup process for the machine.

Maintenance

Covers suggested maintenance procedures and schedules for keeping the machine in top condition.

Part Sections

Ordering Repair Parts

Provides guidance on how to locate and order necessary repair parts for the machine.

Extension Cords

Operation Controls

Wave Set Up

How It Operates

Cleaning

Service Instructions

Access Belt;Brush Motor

Steps to access and service the belt and brush motor components.

Access Vac Motor and Filters

Procedure to access and remove the vacuum motor and its associated filters.

Vac Motor Carbon Brushes

Instructions for accessing and replacing the carbon brushes in the vacuum motor.

Brush Motor

Steps for accessing and removing the brush motor assembly.

Carbon Brush

Guidance on checking and replacing carbon brushes for the brush motor.

Maintenance

Daily Maintenance

Routine checks and actions to perform on the machine daily.

Regular;Periodic Maintenance

Scheduled maintenance tasks to be performed at regular intervals.

Suggested Spare Parts List

A list of recommended spare parts for the machine with their part numbers.

Trouble Shooting Chart

Windsor wave Specifications

General

Brand	Windsor
Model	wave
Category	Vacuum Cleaner
Language	English