EasyManuals Logo

Wine Enthusiast Beverage Center User Manual

Wine Enthusiast Beverage Center
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
20
Power Interruptions
• Occasionally there may be power interruptions due to thunderstorms
or other causes. Remove the power cord from AC outlet when a power
outage occurs. When power has been restored, wait 3 to 5 minutes
then re-plug the power cord to AC outlet.
Vacation and Moving Care
• For long vacations or absences, unplug the appliance and clean the
appliance and door gaskets according to "General cleaning" section.
Leave doors open, so air can circulate inside.
Always move the appliance vertically. Do not move with the unit
lying down, as possible damage to the sealed system could occur.
Note: After moving, wait for 24 hours before plugging in the
appliance.
Troubleshooting
Many common issues with your appliance can be easily solved. Try the troubleshooting
tips below if you experience any problems.
Appliance Does Not Operate:
• Check if appliance is plugged in.
• Check if there is power in the AC outlet, by checking the circuit
breaker.
Wine appears too warm:
• Frequent door openings.
• Allow time for recently added wine to reach desired temperature.
• Check gaskets for proper seal.
• Clean condenser coils.
• Adjust temperature control to colder setting.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wine Enthusiast Beverage Center and is the answer not in the manual?

Wine Enthusiast Beverage Center Specifications

General IconGeneral
BrandWine Enthusiast
ModelBeverage Center
CategoryWine Cooler
LanguageEnglish

Related product manuals