6
• Once you have plugged the unit into an electrical outlet, let the unit run for at
least 30 minutes to acclimate before making any adjustments.
Temperature Adjustment
• When the appliance is plugged in for the first time, the LED display will show the
factory preset temperature of 50°F.
• The appliance can be set to accommodate your wine storage requirements. To
set the temperature, press the up or down arrow button to increase or decrease
the temperature setting until the desired temperature is attained. It may take
some time to reach the set temperature.
• The temperature will fluctuate more so when the appliance is empty.
Shelving (Type and number of shelves will vary per model)
Your cabinet was designed to store a maximum number of bottles securely. We
recommend that you observe the tips below to optimize loading:
• Remove tape from shelves once unit is stable and ready for bottle storage.
• Disperse the bottles evenly to avoid concentrating weight in one place. Bottles
must not touch either the back of the cabinet or the step at the bottom. While
your appliance was designed to hold large format bottles, such as Pinot Noir and
Champagne, larger bottles reduce the number of bottles you can fit on a shelf.
• Make sure that the bottles are not all grouped together either at the top or
bottom of the cabinet.
• Only pull out one shelf at a time, never attempt to pull out more than one.
• Maximum weight capacity per shelf is 55 lbs.
• All shelves are full size steel with low profile scalloping to accommodate varying
bottle sizes except the shallow bottom wire shelf.
Charcoal Filter
Charcoal air filters ensure the natural ventilation and humidity control that
encourages wine to mature properly free from damaging odors.
We recommend you replace your filter every year, order part # 268 03 98 99 at
WineEnthusiast.Com.
To Next Page
Loading...
Need help?
General
