10
7. Rotate the door 180
o
so that the top is now the bottom, and install it by
attaching the support rod with screws.
Instructions for Installing a Custom Panel
Your NFINITY Panel Ready Appliance is designed to accept a customer supplied
custom wood panel. The easiest means to attach the panel is by removing the
door, clamping the panel to the door and attaching with screws, then replacing the
door onto the unit.
1. Frame Preparation
- For a Right Hinge opening appliance, cut the panel to the dimensions in the
diagram below. Reverse for a left hinged opening appliance.
To Next Page
Loading...
Need help?
General
