Wine Enthusiast Beverage Center User Manual

9
2．Remove the door off the upper hinge and take out the support rod.
3. Use a small flat head screwdriver to pry up the plastic cap on the top center
(lock hole) of the door and insert into the bottom center hole.
4. Unscrew the upper hinge and bottom hinge.
5. Pry out the plastic caps at the left side of the cabinet and move them to the
right side.
6. Install the hinge set which are packed as accessories with the instruction
manual to the opposite side.

Wine Enthusiast Beverage Center Specifications

General

Brand	Wine Enthusiast
Model	Beverage Center
Category	Wine Cooler
Language	English