To Next PageTo Next Page
Need help?Do you have a question about the Winegard HD8200U and is the answer not in the manual?
General| Type | Outdoor TV Antenna |
|---|---|
| Reception Range | Up to 70 miles |
| Material | Aluminum |
| Impedance | 75 ohms |
| Frequency Range | UHF 470 MHz |
| Polarization | Horizontal |
| Mounting Type | Mast Mount |
| Color | Gray |
Verify all parts are present from the box and familiarize yourself with their names before assembly.
Unfold rear section elements correctly, ensuring they lock into place and point in the correct directions.
Unfold front section elements and prepare the section by removing a specific director element.
Join the front and rear booms, guiding UHF phasing lines into the cartridge housing correctly.
Unfold corner reflector elements and attach the reflector booms to the main assembly using hardware.
Securely install the boom brace connecting the corner reflector boom to the rear section for stability.
Attach the housing cover, ensuring all four snaps are securely locked into place.
Prepare and attach the coaxial cable to the cartridge housing, securing it with the rubber boot.
Securely mount the antenna to the mast, ensuring the front points towards stations and clamps are tightened.
Prevent wind whipping by securing the coaxial cable downlead to the mast using tape or ties.
Install lightning arrestor and grounding block, connect ground wires, and secure to house with stand-off insulators.
