To Next PageTo Next PageWhat to do if my Winegard Shaw Direct SK-7002 shows 'STOW FAILURE ANT NOT STOWED'?
If your Winegard TV Antenna fails to stow and displays 'STOW FAILURE ANT NOT STOWED', stop moving the vehicle. Try stowing the TRAV’LER again. If it still fails, inspect for any obstructions that may be preventing it from stowing properly.
How to fix 'ANTENNA CONNECTION FAILED' on Winegard Shaw Direct SK-7002?
The 'ANTENNA CONNECTION FAILED' error on your Winegard TV Antenna may indicate a loose or improper connection of the data cable on the back of the Trav’ler Interface. Ensure it is securely connected.
What causes 'STOW FAILURE STOW UNKNOWN' error on Winegard Shaw Direct SK-7002 TV Antenna?
The 'STOW FAILURE STOW UNKNOWN' error on your Winegard TV Antenna may indicate a loose or improper connection of the data cable on the back of the TRAV’LER Interface. Ensure it is securely connected.
Why is my Winegard TV Antenna showing 'EL HOME FAILURE'?
The 'EL HOME FAILURE' error with your Winegard TV Antenna means something is preventing the TRAV’LER Mount from raising to find the HOME position. Check for obstructions, especially if the unit was recently manually raised or the electronics were replaced.
What does 'NO LNB VOLTAGE' mean on my Winegard TV Antenna?
The 'NO LNB VOLTAGE' error on your Winegard TV Antenna indicates that the TRAV’LER is not receiving the necessary 13-18VDC to power the LNBF. Begin by checking the coax connections to ensure they are properly connected.
What to do if Winegard Shaw Direct SK-7002 TV Antenna displays 'AZ MOTOR STALLED'?
If your Winegard TV Antenna displays 'AZ MOTOR STALLED', it means something is preventing the TRAV’LER mount from rotating. Check for any obstructions that may be hindering its movement.
Why is my Winegard TV Antenna showing 'EL MOTOR STALLED'?
If your Winegard TV Antenna displays 'EL MOTOR STALLED', it indicates that something is preventing the TRAV’LER mount from raising or lowering. Initially, check for any obstructions that might be the cause.
What causes 'SK MOTOR STALLED' on Winegard Shaw Direct SK-7002 TV Antenna?
If your Winegard TV Antenna displays 'SK MOTOR STALLED', it means something is preventing the TRAV’LER reflector and LNBF from rotating. Look around the unit for any obstructions.
General| Brand | Winegard |
|---|---|
| Model | Shaw Direct SK-7002 |
| Category | TV Antenna |
| Language | English |
Details the Winegard TRAV'LER Automatic Multi-Satellite TV Antenna's capabilities and benefits.
Explains the meaning of icons used for important information and helpful tips.
Provides contact information for Winegard warranty and Shaw Direct programming.
Outlines the manual's disclaimer and lists relevant trademarks.
Step-by-step guide to start the antenna search process.
Describes the interface messages during the satellite search and acquisition.
Instructions on how to stow the antenna for travel.
Guide to enter the user menu for advanced operations like manual search.
Steps to choose specific satellites manually.
How to perform an emergency shutdown and related precautions.
Steps to connect the receiver to the TV and antenna.
How to check signal status and request a signal refresh.
Lists error codes and their corresponding solutions for troubleshooting.
Notes on factors affecting satellite acquisition like obstructions and weather.
