To Next PageTo Next PageWhy is my Winegard TRAV’LER DIRECTV SLIMLINE SK-3005 TV Antenna not receiving 99 and 103?
If your Winegard TV Antenna is not receiving channels 99 and 103, ensure that the B-Band Converter is installed.
What to do if my Winegard TV Antenna fails to stow?
If your Winegard TRAV’LER TV Antenna fails to stow and indicates 'ANT NOT STOWED', avoid moving the vehicle. Attempt to stow the TRAV’LER again. If the issue persists, inspect for any obstructions.
How to fix 'ANTENNA CONNECTION FAILED' error on Winegard TV Antenna?
Ensure the data cable is securely connected to the back of the Trav’ler Interface on your Winegard TV Antenna.
General| Brand | Winegard |
|---|---|
| Model | TRAV’LER DIRECTV SLIMLINE SK-3005 |
| Category | TV Antenna |
| Language | English |
Press and hold [POWER], then press [SELECT] while still holding [POWER] to stop and turn off the unit.
Check data cable connection on the back of the TRAV'LER Interface for proper connection.
Check for obstructions preventing mount movement or rotation. Contact support if unresolved.
Try stowing again; check for obstructions if it fails. Check data cable for 'STOW UNKNOWN'.
Contact Winegard Technical Support for motor direction or runaway issues.
Check coax connections and ensure 12-18VDC for LNBF. Contact support if issue persists.
Contact Winegard Technical Support for these error codes.
Ensure B-Band Converter is installed for 99/103; check for automatic stow issues.
