2
Table of Contents
Welcome....................................................................................................................................................... 1
Using This Manual ........................................................................................................................................ 1
Assembly Instructions .................................................................................................................................. 2
Battery Charging Tips ................................................................................................................................... 5
Operation ..................................................................................................................................................... 8
Maintenance .............................................................................................................................................. 11
Troubleshooting ......................................................................................................................................... 13
Warnings and Safety .................................................................................................................................. 15
Limited Warranty ....................................................................................................................................... 19
Assembly Instructions
NOTICE: The following assembly steps are only a general guide to assist in the assembly of your Wing Bike and is not a complete
or comprehensive manual of all aspects of assembly, maintenance and repair. We recommend you consult a bicycle repair
specialist to assist in the assembly, repair and maintenance of your bicycle.
Step 1:
Remove bike from carton and carefully set out all contents of the box. Remove packaging
material protecting the bicycle frame and components. Ensure the following pieces are included in the
package. If there are any missing parts please contact Wing Bikes for help replacing missing pieces.
1. Wing Bike
2. Front wheel with fender and front wheel axle bolts
3. Box with Pedals, Stem Extender (Freedom Only)
4. Assembly tools (2 hex wrenches, 2 spanner wrenches).
5. Charger and Battery
6. Keys for battery pack with button pad for alarm
7. Seat and seat post
Step 2:
Install your handlebar using your 4 mm hex wrench. Loosen the 4 handlebar clamp bolts to
remove the clamp.
To Next Page
Loading...