English AM90
MANUAL & PLASMAWAVE®
3. Manual Mode (setting fan speed)
Users can opt to manually set the fan speed to Low, Medium, High, or Turbo.
Press the Fan Speed button to set the
desired fan speed.
NOTE
•
When Manual Mode is selected, Auto Mode is automatically
disabled.
4. PlasmaWave®
By default, PlasmaWave® is enabled whenever the unit is powered on.
Press the Plasmawave® button, when the
unit is on, to enable or disable this feature.
NOTE
•
In Auto mode, as the indoor air quality improves, the fan
speed will automatically be reduced to Low.
•
When the unit is running, you may hear a chirping or buzzing
sound. The sound is from large particles passing through
PlasmaWave®, it is normal and does not signify product
failure.
To Next Page
Loading...
