English AM90
This product comes with all the required filters. The protective plastic wrap must be
removed from the filters before use.
Operating the unit without removing the plastic wrap may result in product failure.
Unplug and make sure the unit is turned off before installing filters.
•
To remove the front panel release the
latch at the lower edge of the panel.
Press the Pre-filter tabs near the top of the
filter, release and remove.
Remove filters from protective plastic wrap.
•
Operating the unit without removing
filters from plastic wrap may cause
abnormal noise, deformation, or fire as a
result of overheating.
INSTALLING FILTERS
NOTE
•
Refer to pages 13 - 15 for details on how to replace filters.
To Next Page
Loading...
