English AM90
INITIAL OPERATION
Insert the power cord into an electrical
outlet.
Press the ‘Power’ button.
NOTE
•
During the first 4 minutes of power up, the Air Quality
Indicator will flash as the Smart Sensors measure the air
quality in the environment, after which normal operation will
begin.
By default, when the unit first powers on, the
mode will be set to Auto with PlasmaWave
®
enabled.
•
When in Auto mode, the fan speed will
be automatically adjusted according to
the environments air quality.
•
PlasmaWave® works to remove harmful
airborne contaminants.
NOTE
•
In Auto mode, as the indoor air quality improves, the fan
speed will automatically be reduced to Low.
•
When the unit is running, you may hear a chirping or buzzing
sound. The sound is from large particles passing through
PlasmaWave®, it is normal and does not signify product
failure. To disable PlasmaWave®, see page 12.
To Next Page
Loading...
Need help?
General
