Winix AM90 - FILTER INSTALLATION AND MAINTENANCE; Filter Insertion and Panel Reattachment


English AM90
INSTALLING FILTERS

Install the filters until they fit securely in
place.
Filters must be installed in this order:
3 True HEPA filter (rear)
2 Carbon filter (middle)
1 Pre-filter (front)
•
To install the Pre-filter, insert bottom tabs
into the slots on either side of the lower part
of the unit, then rotate upward to insert the
upper tabs into the slots at the top part of
the unit until sides audibly click into place.
Pre-lter
Carbon
Filter
True HEPA
Filter

Replace the front panel by first inserting
the latch at the bottom edge into the base
of the unit, then rotate the panel upward
toward the top of the unit until the magnets
pull the lid closed.
Latch

When to service and replace filters:
Filter Indicator Light
When to
service
W
hen to replace
1 Pre-filter none
Clean once every
14days
Permanent
2 Carbon filter none
Can NOT be
WASHED
R
eplace every
3 months
3 True HEPA filter
Lasts up to
12 months

I
ntervals between filter replacement may vary depending on environment.

For optimal use, Pre-filter can be cleaned once every 14 days which can extend the
life of other filters.
To purchase replacement
Winix filters:
(877)-699-4649
www.winixamerica.com
This unit
is compatible
with this
filter
ITEM: 115115
FILTER
A