Winix Tower XQ - Particle Sensor Cleaning

16
English Tower XQ
CLEANING CARE
4. Cleaning the Particle Sensor
①
Open the Particle Sensor cover on the back
of the unit.
②
Use a damp cotton swab to wipe the lens
and intake area of the Particle sensor.
ˍ
To clean the sensor area, use only water.
ˍ
Do not use volatile substances such as
alcohol or acetone.
Lens
Cotton
swab
Lens
③
Wipe away any remaining moisture with a
dry cotton swab.
④
Close the Particle Sensor cover.
ˍ
The Particle Sensors cover may be
cleaned using a handheld vacuum.