SECTION 9 –
FURNITURE AND SOFTGOODS
9-4
3. Arrange dinette cushions to cover bed area.
Bed to Dinette
1. Reattach the table onto the wall support and
lower the table leg.
2. Make sure that the table leg is secured into the
floor support bracket and the leg brace is
locked.
DINETTE/BED CONVERSION -
DREAM DINETTE
™
–If Equipped
(Typical view – your coach may differ)
Dinette to Bed
1. Release the lock rod (located on the bottom of
the table) by turning the lock rod clockwise.
2. Lift the dinette cushions upward and push
table straight down.
3. Secure the lock rod (located on the bottom of
the table) by turning the lock rod counter-
clockwise.
Table
Bracket
Wall
Support
To Next Page
Loading...
Need help?
General
