SECTION 9 –
FURNITURE AND SOFTGOODS
9-2
2. Press the Table Leg Release Button and fold
table leg UP until it “clicks” into locked (90-
degree) position.
3. Remove dinette table from the wall support by
lowering leg end of table and pivoting the
table to release from the wall.
4. Lower dinette table to the floor. Then lower
dinette seat cushion.
5. Unfasten the two snaps located behind the
forward facing dinette backrest cushion.
6. Arrange dinette cushions to cover bed area.
7. Pull to extend side facing dinette seat cushion.
To Next Page
Loading...
