9-1
5 - DASH / AUTO
SECTION 9 - FURNITURE AND SOFTGOODS
SLEEPING FACILITIES
DINETTE/BED CONVERSION
WITH HI-LO TABLE
–If Equipped
(Typical View – Your motorhome may
differ in appearance)
Dinette to Bed
1. Remove both dinette back cushions and set
aside.
2. Lift both dinette seat cushions upward.
3. Release the lock rod on the bottom of the
dinette table by pulling down.
Sleeping facilities are not intended for use
while vehicle is in motion. For safety,
passengers must use safety belted
seating positions while vehicle is in
motion.
To Next Page
Loading...
