Winplus JUMP STARTER PRO - Charging the Jump Starter

4
Press the power button to check the capacity of the Jump Starter.
When charging, the indicator lights will ash one by one. The
number of solid lights indicates the battery capacity. When all the
indicator lights are solid then the Jump Starter is fully charged.
Indicator Lights: 1 Flashing 1 Solid 2 Solid 3 Solid 4 Solid
Battery Capacity: Below 5% 5-25% 26-50% 51-76% 76% - Full
POWER LEVEL INDICATOR LIGHTS:
CHARGING THE JUMP STARTER:
At home:
1. Plug the USB cable into computer or any USB
2A wall adaptor (not included).
2. Connect the micro USB cable onto the Jump Starter .
In Car:
1. Plug the 9V 1.7A USB car adaptor
(included) into an available 12V socket.
2. Connect the micro USB cable onto
the Jump Starter .
NOTE: In order to
reduce the risk of re
or electric shock, an
adapter shall be chosen
that is suitable for
the application and is
certied as a Class 2
or LPS power supply or
power adapter.
NOTE: It is recommended to recharge the Jump Starter every
3-4 months to maintain the efciency and prolong the service life
of the internal battery even if the unit has not been used.