EasyManua.ls Logo

Wintal DAB20C - Configuration - DAB;FM Setup; FM Mode Hearing Options; FM Signal Threshold Adjustment; DAB Signal Threshold Adjustment

Wintal DAB20C
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DAB/FM Setup
FM Mode
Option to choose hearing in Stereo or mono.
Note: As the radio is a mono, this option does not
apply.
FM Threshold
Option to adjust the scanning threshold to pick up
stronger or weaker FM stations. There are two types of
threshold, Seek Threshold and Stereo Threshold. A
stereo separation adjustment is provided in the FM
receiver for lowering the separation level of the left and
right signals and approaching the mono reception to
reduce the noise when the received signal strength of the
FM signal is weak, When the signal strength is strong, the
separation level is increased to automatically receive
stereo reception. If the “Strong” option is selected, only
the radio stations with good separate level will be
received (in stereo). On the contrary, if “Weak” option is
selected, radio stations with low separation level will be
received (in mono).
DAB Threshold
Option to adjust the scanning threshold to pick up
stronger or weaker DAB/DAB+ stations.
DAB/FM Information
You can select to enable or disable the DAB/FM
information.
Service Following (DAB/FM-IR)
This is a feature to help finding the same channel over
internet provided that the radio station has an internet
stream available and it is suitable to play on the radio.
Listening over internet radio allows free of noises which
Conguration
- 25 -