EasyManua.ls Logo

Winterhalter GS 315 User Manual

Winterhalter GS 315
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
89007312-04/07-08
Betriebsanleitung
Operating instructions
Manuel d‘utilisation
GS 302, GS 315
Winterhalter Gastronom GmbH
Tettnanger Straße 72
D-88074 Meckenbeuren
Telefon 07542/402-0
Telefax 07542/402-199
www.winterhalter.de
info@winterhalter.de
Question and Answer IconNeed help?

Do you have a question about the Winterhalter GS 315 and is the answer not in the manual?

Winterhalter GS 315 Specifications

General IconGeneral
BrandWinterhalter
ModelGS 315
CategoryDishwasher
LanguageEnglish

Summary

Intended Use

Safety Instructions

Installation and Connection

Check for Completeness

Verify delivery against note and inspect for transport damage. Report any damage immediately.

Setting Up and Alignment

Ensure the machine is installed level and protect adjacent furniture from moisture.

Connection to Water Supply

Connect to fresh water inlet with adequate pressure and flow rate. Use a main stop valve.

Commissioning

Description of the Machine

Operating Panel

Overview of the control panel, its buttons, displays, and indicators.

How the Dishwasher Works

Explanation of the machine's operation cycle: filling, heating, washing, draining, and rinsing.

Wash Programmes

Details on available wash programmes: normal, short, intensive, and reduced rinse temperature.

Before Washing

Adding Rinse Aid and Detergent

Instructions for filling detergent and rinse aid tanks, and checking levels.

Add Detergent Powder

Procedure for adding detergent powder to the filter cartridge before starting a wash.

Adding Regenerating Salt

Guidance on filling the salt container for machines with an integral water softener.

Washing

Washing with the Normal Programme

Steps for loading dishes and starting the normal wash cycle.

Add More Detergent Powder

Instructions on when and how to add more detergent powder after several wash cycles.

Washing with Special Programmes

How to select and use special programmes like short, intensive, or reduced rinse temperature.

After Washing

Draining the Tank; Self-Cleaning Programme

Procedure for initiating the self-cleaning cycle and draining the wash water.

Switching Off

Steps to safely switch off the machine and isolate it from the power supply.

Maintenance and Care

Every Day After Washing

Daily cleaning tasks for filters, wash trays, and wash jets.

As Required

Maintenance tasks to be performed as needed, such as descaling or cleaning.

Faults

Faults Not Requiring Service

Troubleshooting steps for common faults that can be resolved by the user.

Faults Requiring Service

Identifying faults that necessitate contacting the Winterhalter customer service.

Emissions

Noise

Information on the noise emission value of the machine.

Water Vapour

Notes on water vapour emission during operation and protecting surroundings.

Related product manuals