WINYCAM LOG - 3-20. Firmware Upgrade; 3-21. SD card format

To Next Page

To Previous Page

WINYCAM LOG

How to use

1) Remove the SD card from Winner after turning off the power completely.

2) Backup all files that are stored in the files to your PC.

3) Download the latest firmware from our website (http://www.winycam-eng.com) and copy to a SD card.

4) Insert the SD card to Winner. After power ON then firmware will be updated automatically.

5) When the firmware update is completed, Winner will be initialized and a voice guide will be announced

1. Turn on the power while pressing the “REC” button.

2. While you press “REC” button, format will start.

3. When you press “REC” button briefly within format stand-by time, the SD card will be formatted and rebooted.

※ If REC button is not pressed during the format waiting time, the format will be canceled automatically and

change to the normal recording.

3-20. Firmware Upgrade

3-21. SD card format

Firmware Update

How to format the card if the SD card has recognition error

Firmware File Format

File name will be tcc_fw_1.0_yymmdd.tar - yymmdd will change depending on year/month/date of the

firmware version.