Wireless-tag SigmaStar SSD201 - 3.14 Extension Interface (GPIO)

SSD201/202 7-inch Smart Display User manual
14
/14
Wireless-Tag Technology Co., Limited http://www.wireless-tag.com
3.14 Extension Interface
（
GPIO
）
Extension interface adopts a 6Pin PH2.0 connector. The interface definitions are shown in Table
13:
Figure 14. Extension interface pin diagram
Table 13. Extension interface pin definition
Pin No.
Pin definition
Default function
1
GND
GND
2
GPIO11
I/O
3
GPIO2
4
GPIO7
5
GPIO6
6
GND
GND
Order information:
Part Number
Description
IDO-SBC2D07-V1-21EC
(201-2GW), 201 board + 2G SPI NAND FLASH + WIFI + Bluetooth
IDO-SBC2D07-V1-22EC
(202-2GW), 202 board + 2G SPI NAND FLASH + WIFI + Bluetooth
IDO-SMLCD71-V1-2EC
TP201 board + 2G SPI NAND FLASH + WIFI + Bluetooth + 7" display
IDO-SMLCD72-V1-2EC
TP202 board + 2G SPI NAND FLASH + WIFI + Bluetooth + 7" display
Note: Above items don’t include the European 4G module.