Wireless-tag SigmaStar SSD201 - 2. Technical Parameters; 2.1 Hardware Parameters

SSD201/202 7-inch Smart Display User manual
4
/14
Wireless-Tag Technology Co., Limited http://www.wireless-tag.com
2. Technical Parameters
2.1 Hardware Parameters
Table 1. Hardware Parameters
Items
Specifications
CPU
SigmaStar SSD201/SSD202
ARM® Cortex-A7 dual-core processor, up to 1.2GHz
Video processor
supports max. resolution FHD(1920x1080)/60 fps decode. ， H.265/HEVC
decoder，I/P/B slices，all intra-prediction modes,
all inter-prediction modes，supports max. resolution HD(1920x1080)/60 fps
decode.
RAM
Built-in DDR2/DDR3 memory, support auto-refresh and self- refresh modes,
64MB by default (up to 128MB)
Storage
Supports 1/2/4-bit SPI-NOR/SPI-NAND Flash ， 128MB by default （ up to
512MB）
OS
Linux
Ethernet
1-channel 10/100Mbps half duplex/full duplex Ethernet
WIFI
Equipped with Singmaster wifi chip (SSW101B), with high performance and
500m transmission distance in open space
Display
Video output interface:
-1 x RGB, support FHD (1920x1080)/60 fps decoding output, with
1024*600 IPS RGB module by default
Audio
1 x left and right channel speaker (PH-4 connector)
Serial port
1x DEBUG（PM_UART）
1 x RS232
1 x RS485
USB
1x USB 2.0（USB female）
TF card
1 x Micro SD card standard（support SDIO2.0）
RTC
1220 button battery, easy to maintain
Extension
interface
4 x GPIO