EasyManua.ls Logo

WiseWay GW1949 - Specifications; Heating Specifications; Dimensions; Commitment to Safety

WiseWay GW1949
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
SPECIFICATIONS
CONGRATULATIONS!
You’ve purchased a heater from North America’s oldest manufacturer of wood burning products.
By heating with wood you’re helping to CONSERVE ENERGY!
Wood is our only Renewable Energy Resource. Please do your part to preserve our
wood supply. Plant at least one tree each year. Future generations will thank you.
DIMENSIONS
Height 50”
Width 24”
Depth 15”
Weight 131”
HEATING SPECIFICATIONS
Estimated Fuel Burn Rate* (lowest setting) 2 Lb/Hr
Estimated Burn Time (lowest setting) 31 Hrs
Hopper Capacity 60 lbs. ( 27kg)
* Pellet size may effect the actual rate of fuel feed and burn times. Fuel
feed rates may vary by as much as 20%. Use PFI listed fuel for best results.
It is highly recommended that the initial burn of your new stove be done outdoors. The paint used to coat
your stove a high temperature paint that is dry upon arrival but has a nal cure that happens during the initial
burn. This cure will last 20-30 minutes and will produce fumes and some smoke.
OUR COMMITMENT TO SAFETY
These stoves are constructed with utmost care and precision. Designs comply with national safety standards.
However, personal safety begins with good re management.
The temperatures of surfaces on your stove extremely hot during operation. It is essential to monitor foot
traf c around the stove to prevent burns and protect the overall safety of your home and loved ones.
Always read and follow the instructions for safe use and maintenance of your stove.
Surfaces of the stove get EXTREMELY HOT!
Be aware that surfaces may still be hot for an extended period of time after the stove has been shut down.
Never leave young children or pets around any heating source.
Educate your family before beginning operation of your new stove.
Never block free air ow through the open vents of the stove.
Do not place ammable items on or near any stove.
Never place foreign objects in the hopper.
This stove was designed and approved for pelletized wood fuel only. Any other type of fuel burned in
this stove is prohibited.
This is a wood stove that burns pellet fuel. It must be treated as a wood stove. As with any wood stove
periodic cleaning and maintenance is required. Failure to clean and maintain your stove and chimney
may result in poor performance.
Always allow the stove to cool completely before performing any maintenance.
Never use gasoline, gasoline type lantern fuel, kerosene, charcoal lighter uid, or similar liquids to start up
or freshen up a re in this stove. Keep all such liquids well away from the stove while in use.
This manual describes the installation and operation of the Brand Name, GW1949 wood heater. This heater
meets the 2015 U.S. Environmental Protection Agency's crib wood emission limits for wood heaters sold after
May 15, 2015. Under speci c test conditions this heater has been shown to deliver heat at rates ranging from
7481 to 19475 Btu/hr and 1.9g/hr.