To Next PageTo Next Page
Need help?Do you have a question about the WiseWay GW1949 and is the answer not in the manual?
General| Brand | WiseWay |
|---|---|
| Model | GW1949 |
| Category | Pellet stove |
| Language | English |
Details on estimated fuel burn rate, burn time, and hopper capacity.
Provides the height, width, depth, and weight of the stove.
Key safety guidelines for operating the stove, including hot surfaces and flammable items.
Specifies minimum hearth dimensions and material requirements for USA and Canada.
Important warnings and instructions regarding vent installation and clearances.
Guidance on chimney height, diameter, and pipe connection for optimal draft.
Recommendations for vertical stove pipe runs and extending pipe height above the roof.
Details specific clearance measurements from the stove to walls and ceiling.
Requirements for fresh air intake and securing the stove in residential and mobile homes.
Details four methods (A, B, C, D) for combustible wall pass-throughs with specific clearance requirements.
Covers professional installation, local codes, chimney types, and specific restrictions.
Specific instructions and warnings for mobile home and basement installations.
Detailed steps for assembling the main body of the stove, including base and hopper installation.
Instructions for installing the temperature gauge and the damper slide mechanism.
Procedure for installing the primary burn tube, secondary burn plate, and ash tray.
Guidance on applying insulation rope to seal the hopper opening.
Instructions for sealing the feed tube opening and lid with insulation rope.
Applying silicone sealant to the edges of the hopper feed tube for sealing.
Details on recommended pellet size, quality, and ash content for optimal performance.
Lists materials that must not be burned in the stove due to safety and performance risks.
Advice on professional installation, draft, and basement/airtight house considerations.
Tips on using premium pellets, cleaning the secondary burn plate, and stove operation.
Guidance on seeking help from dealers for questions or problems encountered.
Step-by-step instructions for igniting the stove using a handheld propane torch.
Step-by-step instructions for igniting the stove using a 120 volt industrial heat gun.
How to control stove temperature using the damper slide and properly shut down the unit.
Guidance on adjusting the primary burn basket for optimal pellet feed and temperature control.
Instructions for managing creosote, soot, fly ash, and proper ash disposal.
Guidance on maintaining proper draft, minimizing visible smoke, and avoiding overfiring.
Instructions for inspecting and maintaining door and glass gaskets, and cleaning the glass window.
Advice on understanding stove operation, CO monitors, and warnings about glass care.
Tips on inspecting the stove, pellet fuel, draft, and general operation.
Advice on draft issues, basement installations, ventilation, and using dampers/caps.
Information on using original parts for warranty and component replacement.
Details the specific information needed when ordering replacement parts for the stove.
