Wisi TANGRAM GT01W0230 User Manual

www.
©WISI Communications GmbH & Co. KG
www.wisi.de
Quick Guide for GT01W Basic unit
2016-06-13, JoMe
GT01W0230, GT01W0048 TANGRAM Basic Unit
NOTE:
This Quick Guide is used primarily for commissioning the unit at start-up by providing the parameters
necessary to start operation. Details for mechanical information, safety information, configuration
and handling of these products are provided in the manual and configuration guide.
Basic unit for the modules
Edge Modules
GT21
Edge PAL
GT22
Edge FM
GT23
Edge QAM
GT24
Edge COFDM
GT26
Edge ISDB-T
Reception Modules
GT31
DVB-S/S2/C/T/T2/ISDB-T – IP Gateway
GT32
ASI - IP
GT33
ATSC – IP Gateway
Transcoder Modules
GT37
Linear Transcoder
Scrambler and Descrambler Module
GT41
IP Processing Module
GT42
CI Descrambler

Wisi TANGRAM GT01W0230 Specifications

General

Input Voltage	100-240 VAC
Frequency	50/60 Hz
Weight	3.5 kg
Protection Class	IP20
Storage Temperature	-20…+70 °C
Humidity	5…95 % (non-condensing)
Power Consumption	typ. 30 W

Summary

Safety and Agency Approvals

Legal Reference and Safety Standards

Details legal and international safety standards for optical communication systems.

Electrical Safety

Instructions for grounding and circuit breaker use to prevent electric shock.

ESD Protection

Guidelines for handling electrostatic sensitive devices to prevent damage.

Assembling Chassis and Modules

Assembling GT-Modules

Procedure for installing GT-modules into the TANGRAM chassis.

Assembling Redundant Power-Supply

Steps to install a redundant power supply unit for the TANGRAM.

Fitting and Connecting Cables

Rack Fitting with Montage Set

Guidance on mounting the TANGRAM unit into a 19-inch rack for proper ventilation.

Backside Connections

Connect grounding, power supply, and input/output signals to the unit's rear.

Frontside Connections

Connect network cables to the Management and streaming ports on the front.

Connecting to TANGRAM Web UI

Default IP Address

Information on accessing the TANGRAM Web UI using the default IP address.

Changing IP Address

Procedure to modify the TANGRAM's IP address for network integration.

Important Information and Maintenance

Operating System Notes

Key considerations for ventilation, operation, and temperature for the TANGRAM.

Changing the Fan-Unit

Instructions for replacing the fan unit while the device is running.

Changing the Power Supply

Procedure to replace a power supply unit, potentially while the device is operational.

Spare Parts Identification

List of article numbers for spare parts, including chassis, PSU, and fan units.

Service and Support

Support Contact Information

Details on how to contact WISI for support and access online resources.