WisyCom MTK982 - CONFORMITY AND DECLARATIONS

MTK982 User Manual
rev.03
20
Conformity:
Model
In Compliance with
Max Power&
Freq. range
[MHz]
Country
MTK982-EU
EN 301 489-1/-9
EN 600065
EN 300 422-1/-2
50 mW
470-700MHz
Europe
MTK982-EUX
EN 301 489-1/-9
EN 600065
EN 300 422-1/-2
EN 300 454-1/-2
2W*
1
470-700MHz
Europe
MTK982-US
PART 74
FCC-ID: POUMTK982
250 mW
470,075‐607,925
20 mW
614,075‐615,925
653,075‐656,925
657,075‐662,925
1000 mW
941.5-959.85
USA
MTK982
RSS-123, RSS-210
IC: 11967A-MTK982
250mW
470,075‐607,925
20 mW
614,075‐615,925
653,075‐656,925
657,075‐662,925
1000 mW
941.5-959.85
Canada
MTK982-U15
PART 15
FCC-ID: POUMTK982
50mW
470,075‐607,925
20 mW
614,075‐615,925
653,075‐656,925
657,075‐662,925
USA
*
1
MTK982-EUX is not an SRD device, thus it requires specific authorization by your local frequency authority!
Before putting the device into operation, please observe the
respective country-specific regulations!
Conformity identification is visible on the display by accessing from the Main menu the
Info> Standard submenus:
• step 1: access submenu Info
• step 2: access submenu Standard.
- there are no special codes, accessories, or permissions to unlock the screen and accessing to the Info>
Standard menu.
- the Conformity identifier is clearly legible on the display without the aid of magnification.
- the regulatory information is secured and implemented in a factory-set-unalterable format.