Need help?Do you have a question about the WisyCom MTP40 and is the answer not in the manual?
General| Type | Bodypack Transmitter |
|---|---|
| Modulation | FM |
| Battery Life | Up to 8 hours |
| Audio Input | XLR |
| Power | 2 x AA batteries |
Describes turning on wireless transmission and the display.
Explains how to open the microphone body to access controls and batteries.
Covers critical safety instructions for device usage and operation.
Explains the meaning of the device's bi-color LED signals for status indication.
Details battery types and the procedure for replacement.
Guides the user on activating wireless transmission and checking battery status.
Describes the OLED display, buttons, and selector for device configuration.
Explains how to turn the OLED display on and off manually or automatically.
Presents the logical flow and options available within the device's setup menus.
Details the brief information shown when the device powers on.
Explains the key operational data displayed in the status menu.
Covers saving, loading, and managing preset configurations for the transmitter.
Explains how to set up frequencies and channels for operation.
Details settings for AF gain and high-pass filters.
Details microphone input modes, phase, and PTT configurations.
Explains how to select between high and low RF power outputs.
Describes the available noise reduction companding systems (ENC/ENR).
Covers LED brightness, mode, and battery type settings.
Explains IRDA connection capabilities and device locking.
Details entering bootloader mode for firmware updates.
Details MIC modes, gain, PTT, and LED modes for the LEMO connector.
Lists available antennas, cables, power adapters, and programming kits.
Introduces the IR programmer software for device configuration and updates.
Explains connecting the device to the PC via the IR programmer.
Details modifying and locking parameters using the software's current settings panel.
Describes managing frequency groups, channels, and locking/hiding status.
Explains saving and loading frequency data using .wdf files.
Covers managing named presets, locking parameters, and their values.
Details loading and saving user configurations via .wcf files.
Lists comprehensive technical data for the MTP40 transmitter.
Provides information on battery life, physical dimensions, weight, and option codes.
Presents the official declaration of compliance with EU directives and standards.
Offers instructions on proper disposal of the equipment and batteries.
To Next Page
