Need help?Do you have a question about the WisyCom MTK952 and is the answer not in the manual?
General| Brand | WisyCom |
|---|---|
| Model | MTK952 |
| Category | Transmitter |
| Language | English |
Lists the primary technical specifications and capabilities of the MTK952 dual transmitter.
Details advanced technologies employed in the MTK952, such as DDS, double conversion, and DSP.
Alerts users about high headphone output power and potential hearing damage.
Provides guidance on adjusting audio levels using LED indicators for optimal modulation.
Describes the SCAN, SYNC, and INFRARED functions for automatic receiver synchronization.
Details the configuration and monitoring of Transmitters 1 and 2, including indicators and displays.
Explains the monitor audio function for transmitters 1 and 2 via headphone jack.
Covers the POWER ON/OFF button and the LOCK function for display editing.
Details all input and output connectors on the rear panel, including power, audio, digital, Ethernet, and antenna.
Explains how to view basic information like firmware version, serial number, and bandwidth.
Describes the main status screen displaying transmitter name, frequency, power, and SWR.
Outlines the main menu structure, including Channel/Group, Group Name, Mode, TX Power, and Audio Source settings.
Details the options available in the menu, such as Display brightness, timeout, IP address, and firmware versions.
Explains how to adjust bass, mid, and treble frequencies and gain using the equalizer settings.
Allows editing channel, group, and frequency settings.
Enables assigning or changing a name for a channel group.
Allows assigning a Mode setting to the transmitter.
Explains how to adjust bass, mid, and treble frequencies and gain using the equalizer settings.
Lists and describes configurable parameters and information displays like Name, Brightness, Timeout, IP, Serial, and temperatures.
Details how alarms are shown and accessed, including alarm count and list access.
Compares mode settings (Mono/Stereo, Compander, Deviation, Squelch) with compatible Wisycom receivers.
Describes the step-by-step process for synchronizing the transmitter with a receiver using the IR interface.
Explains the status messages displayed after successful synchronization.
Lists the actions the MTK952 performs when an alarm occurs (display message, LED, alarm list).
Provides a detailed list of alarm codes, types, display messages, LED indicators, and alarm list entries.
Offers solutions for common alarms and issues, including checks and repair center contacts.
Instructions for installing the Rack Tx Manager software.
Steps for uninstalling and installing the latest version of the software.
Guide on establishing a connection between the MTK952 and the Rack Tx Manager software.
Describes how to load channel memory from a WDF file into the MTK952.
Explains how to save the MTK952's channel memory to a WDF file.
Mentions using a spreadsheet to modify WDF files for channel memory customization.
Covers switchable channels, frequency, temperature, RF output power, impedance, and emissions.
Details analogue/digital audio inputs, monitor output, and compander types.
Lists display type, connectivity interfaces, power supply, and physical dimensions.
Compares mode settings (Mono/Stereo, Compander, Deviation, Squelch) with compatible Wisycom receivers.
Lists the EU directives the product complies with, such as EMC and Radio Equipment.
Lists the technical standards and specifications applied for compliance.
Provides instructions for the proper disposal of the product according to WEEE directive.
Specific information for Italian users regarding the disposal of professional electrical and electronic equipment.
To Next Page
