Need help?Do you have a question about the WisyCom MTP61 and is the answer not in the manual?
General| Brand | WisyCom |
|---|---|
| Model | MTP61 |
| Category | Transmitter |
| Language | English |
Describes the color coding of LED 1 for audio status.
Explains LED 2 states for RF transmission and battery.
Details LED 3's function for recording.
Indicates LED status during battery recharging.
Explains SEL/ON button functions for device control.
Details UP/GAIN button menu navigation and quick access.
Describes accessing RECORDING setup via GAIN + CH.
Outlines EXIT/OFF button functions for power and navigation.
Explains DOWN/CH for menu scrolling and channel setup.
Describes EXIT + CH for locking/unlocking the front panel.
How to power on MTP61 for wireless transmission.
How to power on MTP61 without activating wireless transmission.
Details major information shown in the Status menu.
Explains how to access functions from the Status menu.
Instructions for navigating and changing parameters in the Setup menu.
How to unlock the display after automatic locking.
Connect mic, power on, sync, connect antenna, set mic mode, gain, power, jam TC, record.
BT sync settings for receiver synchronization.
Managing and recalling configuration presets.
Configuring frequency, RF power, antenna, gain, modulation, etc.
Configuring recording, timecode, and SD card settings.
Configure Bluetooth interface power.
Configure battery status display (percentage/time).
Adjust LED brightness and mode.
Configure display direction and auto-lock.
Check FW, BL, DSP, Serial, Range, Band, Country, HW versions.
View battery, voltage, current, temperature, and alarms.
How to enable BT sync and compatible receivers.
Details parameters synchronized from receiver to transmitter.
How to recall factory or user-saved configuration presets.
How to change frequency, group, and channel.
Setting the RF power level for transmission.
Guidance on selecting the correct antenna for operation.
How to set audio input gain and use the audio bar indicator.
Selecting between WideBand and NarrowBand modulation.
List of antenna labels, codes, and their respective frequency bands.
Setting the High Pass Filter for audio signal.
Configuring different microphone connection types.
Setting the behavior of the PTT accessory.
Enabling or disabling the audio limiter function.
Activating the calibration tone function for audio setup.
Steps to format the micro SD memory card for recording.
How to start recording and save files automatically.
Information on recording format, quality, and storage.
Accessing recording and JAM functions via shortcuts.
Details the file naming format for recorded files.
How to jam timecode from external LTC sources.
Pinout details for TC audio cables (LEMO to Stereo/BNC).
Procedure for timecode jamming using Tentacle Sync E via Bluetooth.
Powering Bluetooth, configuring name, battery, IED, display.
Checking transmitter serial, range, firmware, and status.
Pinout and impedance for Mic Mode (2W, 2W+B, 3W, AUX).
Frequency range, power, modulation, deviation, and emissions.
AF bandwidth, distortion, SNR, audio input level, and connector.
Storage, time code, sampling rate, interface, LED, PTT, display, power.
Battery life, temperature range, dimensions, and weight.
Details country-specific frequency bands and maximum power levels.
List of antenna labels, codes, and their respective frequency bands.
Information on antenna kits supplied with different MTP61 models.
Compliance with RoHS, WEEE, and Battery Directives.
Specific disposal requirements for Italy regarding electronics and batteries.
FCC compliance rules, conditions, and interference handling.
Industry Canada RSS compliance, conditions, and antenna use.
Evaluation for FCC and ISED RF Exposure limits (SAR).
Location of model and conformity logos on the device.
Essential safety guidelines for operating and maintaining the apparatus.
Conformance to essential EU Directives (Radio, EMC, Safety, ROHS).
To Next Page
