4 Multiple Connection
For software introduction, please referring to the Chapter 2.2.
4.1 Download Link
For multi-connection, please download the multi-connection HID software.
Download link
4.2 Connection Instructions
Step 1. Open the multiple-connection PC software
Step 2. Plugin the USB-HID adapter in the beginning
Step 3. Turn on the sensor after the red light of USB-HID adapter begins
flashing
Step 4. Wait till sensor's blue LED light stops flashing--means pairing succeeds
Step 5. For multiple-connection, repeat Step 2-4
Step 6. Click the HID device accordingly and the data will show
Notice:
The multiple connection will require the USB-HID 2.0 adapter (need to install
CH340 driver)
1. Each BWT61CL Bluetooth 2.0 sensor can only pair with 1 USB-HID adapter.
To Previous Page
Loading...
Need help?
General
