WiT BWT61CL - Warning Statement; LED Status

BWT61CL | manual V22-0412 | www.wit-motion.com
- 6 -
1.1 Warning Statement
 Putting more than 5 Volt across the sensor wiring of
the main power supply can lead to permanent damage
to the sensor.
 For proper instrument grounding: use WITMOTION
with its original factory-made cable or accessories.
 Do not access the I2C interface.
 Do not change the baud rate because
WITMOTION BLUETOOTH sensor’s baud rate is
fixed.
1.2 LED Status
LED
Status
Remark
Red
Flashing
Charging
Blue
Flashing
Pairing process
Keeping still
Successful pairing