WiT WT9011DCL-BT5.0 - App Calibration; Acceleration Calibration

WT9011DCL BT5.0 | manual v23-0213 | www.wit-motion.com
- 33 -
4.3 Calibration
4.3.1 Acceleration Calibration
Step 1. Keep the module horizontally stationary
Step 2. Click the “Calibration” menu
Step 3. Click the “Acceleration Calibration” and wait for 3 seconds
Step 5. Check the result--confirm if there is 1g on Z-axis acceleration